Elite novo Instrucciones Para El Uso página 17

• Turn the overtravel lever (M) 180° to the right
(Fig. 25) to the "CLOSE" position and check the
pressure of the wheel on the unit support (Fig.26).
• If the wheel is moved too far from the middle of
the Roller (Fig.27), shift the resistance unit by brin-
ging the overtravel lever to the "OPEN" position
(Fig.23), loosening the fixing screws of the unit
(Fig.28), tightening them in a more correct position
(Fig.29) and turning the overtravel lever (M) 180° to
the right to the "CLOSE" position (Fig.25).
24
M 25
26
27
• Push the bicycle towards the resistance unit
until the rear wheel touches the roller (fig. 29).
= =
BIKE REMOVAL
• Open the overtravel lever (Fig.23).
• Hold the bicycle with one hand and with the
other open the lever (I), turning it to the "open"
position (fig. 30). Remove the bicycle.
• For carrying, or storage, it is advisable to close
the stand.
• For storage and transport, turn the knob (N)
anticlockwise (Fig. 23) up to its maximum height
(Fig. 31).
EN
28
29
I
30
17