Idiomas disponibles
Idiomas disponibles
SLEEP FEATURE
Press
(Sleep) button to initiate the sleep mode. The selected temperature will increase by 2°F/1 or 2°C
30 minutes after the mode is selected, then another 2°F/ 1 or 2°C after an additional 30 minutes. This new
temperature will be maintained for 6 hours and then return to the original temperature setting. The Sleep
mode program can be cancelled at any time during operation by pressing the Sleep button again.
TO SELECT THE OPERATING MODE
To choose operating mode, press
will cycle through Auto, Cool, Dry and Fan. The indicator light will be illuminated and remain on once
the mode is selected. The unit will automatically initiate the Energy Saver function under Cool, Dry, Auto
modes (only when set to Auto-Cooling and Auto-Fan).
1.
AUTO MODE: When you set the air conditioner to AUTO mode, it will automatically select cooling
or fan only operation depending on what temperature you have selected and the room temperature.
The air conditioner will control room temperature automatically based on the temperature point set
by you. When set on AUTO, the fan speed cannot be adjusted and will run as needed based on the
room temperature.
2.
COOL MODE: When the unit is set on Cool Mode it will run the fan and compressor to reach and
maintain the set temperature.
3.
space is enclosed, and the condenser is operational, there will be some degree of cooling.
4.
FAN ONLY MODE: Use this function to circulate air without cooling it. ALWAYS be sure to open the
the fan button to set the desired fan speed. During set to Fan Only, the display will show the actual
room temperature, not the set temperature, and the temperature setting cannot be adjusted.
OTHER FUNCTIONS
•
ENERGY SAVER: Press
COOL, DRY, AUTO (AUTO-COOLING and AUTO-FAN only) modes. The fan will continue to run for
3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals
until the room temperature is above the set temperature, at which time the compressor turns back on
and cooling starts again.
•
illuminate to indicate the Auto Start program is initiated and the display will show the time currently
set for the air conditioner to automatically start.
When the time of TIMER ON is displayed press the Timer button again and the TIMER OFF indicator
light will illuminate to indicate the Auto Stop program is initiated. Press or hold the UP or DOWN
button to change the Auto time by 0.5 hour increments, up to 10 hours, then at 1 hour increments up
to 24 hours.
The selected time will show on the display for 5 seconds, and the system will automatically revert
back to display the previous temperature setting or room temperature when the unit is on. If the unit
is off, there is no display. The control will count down the time remaining until start.
Turning the unit ON or OFF at any time or setting the timer to 0.0 will cancel the Auto Start/Stop
timed program.
NOTE: The timer will count down the time displayed, and does not operate based on the actual
time of day. Setting the Timer On to 4 and Timer Off to 8 means the air conditioner will turn on 4
hours from the time the auto-start function is initiated, and turn off after another 4 hours.
(Mode) button. Each time you press the button, the selected mode
(Energy Saver) button to set this function. This function is available in
(Timer) button. The TIMER ON indicator light will
20
.) Use
