Idiomas disponibles
Idiomas disponibles
signal is heard.
The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function.
►
Snooze time unit is minutes
Switching OFF the Alarm Signal
11.
While the alarm is sounding, press any button except the "
►
field for more than 3 seconds to stop the alarm signal.
Turn ON Snooze Function
12.
► While the alarm is sounding, Touch the "
alarm signal sounds again after snooze time already been set.
In snooze mode, touch the "
►
press any button except the "
F.Y.I.:
When the snooze function is set to OFF, while the alarm is sounding, press "SNZ" does not have
this snooze function
Maximum/Minimum Temperature/Relative Humidity
13.
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the "MEM"
►
button:
Once to show the maximum temperature and humidity values.
Twice to show the minimum temperature and humidity values.
Three times to return to the current temperature and humidity levels.
To reset the maximum and minimum temperature and humidity, press and hold down the "MEM"
►
button about 2 seconds. This will reset all minimum and maximum data recorded to the current
displayed values.
F.Y.I.:
If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading
►
is above ranges, the HH.H will be displayed
Low Battery
14.
If the battery icon "
►
station in time.
If the battery icon "
►
prompt and change the remote sensor battery of the channel timely
USB Charger Port
15.
When you use USB charger to charge the electronic device, please make sure weather station is
►
powered by main adapter, DO NOT use batteries only.
Background Lighting
16.
If the product is powered by batteries, touch the "
►
When the power supply of the product is inserted into the power supply adapter, the battery will
►
automatically disconnect the power supply, and the backlight will always be bright. Press the "
button to adjust the brightness of the backlight, you can adjust the 4 state: 3 different brightness
backlight and close the backlight. Users can choose according to the personal preferences of
different brightness backlight or turn off the backlight. When the backlight is in the dark brightness or
closed state, you can touch the "
seconds
..
W4 WIFI Weather Station
.
" field for more than 3 seconds to exit the snooze mode. Or
" button to exit the snooze mode.
.
" appears in the "IN" column, please change the battery of the base
" appears in the "OUT" column, please confirm the channel of the battery
" field to lighten the maximum brightness of backlight for 15
" field once to activate the snooze function. The
.
" field. Backlight lit 15 seconds.
13
" button or touch the "
"
"
