Troubleshooting - Skil HT4221-00 Manual Del Propietário

TROUBLESHOOTING

Problem
Hedge trimmer
doesn't work.
Excessive vibration
or noise.
Cause
1. The battery pack is not
attached to the hedge
trimmer.
2. No electrical contact
between the trimmer and
the battery.
3. The battery pack is
depleted.
4. The battery pack or the
hedge trimmer is too hot.
5. The lock-off button is not
depressed.
6. The blade is jammed.
1. Dry or corroded blades.
2. Blades or blade support is
bent.
3. Bent for damaged teeth.
4. Loose blade bolts.
Remedy
1. Attach the battery pack to the hedge
trimmer.
2. Remove the battery, check contacts
and reinstall the battery pack.
3. Charge the battery pack.
4. Release the trigger switch; remove
the battery pack from the trimmer and
allow the battery or the trimmer to cool
down.
5. Depress the lock-off button, then
depress the trigger switch.
6. Remove the battery pack from the
trimmer, remove the obstruction
carefully, then reinstall the battery and
restart the trimmer.
1. Lubricate the blades, following the
section "Lubricating the Blade" in the
manual.
2. Replace with a new blade or support.
Have the tool serviced by an
Authorized SKIL Service Center or
Service Station.
3. Replace with a new blade. Have the
tool serviced by an Authorized SKIL
Service Center or Service Station.
4. Tighten the blade bolts. Using a hex
wrench, turn the bolt clockwise to
tighten.
19