Idiomas disponibles
Idiomas disponibles
PRODUCT SAFETY
GENERAL SAFETY
WARNINGS
WARNING: Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not
play with the appliance.
- If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
- WARNING: The plug must be removed from the
socket-outlet before cleaning or maintaining the appliance.
SYMBOLS
Warning!
Read operator's manual
Double insulation
EN
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for vacuuming air and water
mixtures. The machine is not to be used as a water pump.
MOUNTING
1. ASSEMBLE THE WHEELS
Push each wheel into the container in correct direction. The
four wheels are fit for the four connectors. Use the screws
(a) provided to fasten the wheels. (See Fig. A1- A3)
2. ASSEMBLE THE FLEXIBLE SUCTION
HOSE FOR VACUUMING
Make sure projection (a) on the flexible suction hose is
directly align with the triangle symbol (b) on the hose
connection piece. Push the flexible suction hose into the
hose connection piece firmly. Turn the hose to the left to
ensure it is fixed securely (See Fig. B1-B3).
NOTE: Turn the hose to the right to remove it from the
hose connection piece.
Connect the 3 suction tubes one by one. (See Fig. C1-C3)
Connect the combination nozzle or crevice nozzle to with
the suction tube and connect the suction tube to the flexible
suction hose firmly. (See Fig. D1-D3)
3. ASSEMBLE THE FLEXIBLE SUCTION
HOSE FOR BLOWING (See Fig. E1-E3)
Make sure projection (a) on the flexible suction hose is
directly align with the triangle symbol (b) on the hose
connection piece. Push the flexible suction hose into the
hose connection piece firmly. Turn the hose to the left to
ensure it is fixed securely (See Fig. E1-E3).
NOTE: Turn the hose to right to remove it from the hose
connection piece.
4. THE FUNCTION OF THE NOZZLE
(See Fig. F)
OPERATION
SWITCHING ON AND OFF
Pull the locking latch up and just clasp the slot of the
vacuum cleaner, then press the locking latch down. Lock
11
