Xiaomi AX9000 Manual De Usuario página 6

Idiomas disponibles

Mi mesh networking

For network coverage over a larger area, you can purchase multiple, meshnet-enabled

Mi Wi-Fi routers*. Please follow the steps below to set up your mesh network

* For the product models and versions of meshnet-enabled Mi Wi-Fi routers, please refer to mi.com/global

Pre-conﬁguration

1. Set up the Mi Router AX9000 as the central access point and complete network

conﬁguration. Both indicators on the front of the router should be solid white.

2. Place another router that supports mesh networking with your Mi Router AX9000

next to the central access point; this router will act as a satellite node. Make sure

that the two routers are no more than 1m apart so as to avoid interference, which

may disrupt the network conﬁguration process. Connect to a power supply and

wait 2-3 minutes for the System status indicator on the satellite node to turn

white/blue. At this point, the central access point will automatically discover the

satellite node. The Internet status indicator on the central access point will start to

ﬂash intermi ently (once per second)

* Please make sure that the satellite node has not been pre-conﬁgured. If the satellite node has already been

conﬁgured, press and hold the Reset bu on on the device for at least 5 seconds to reset, then try again

Conﬁguration

Method 1 (recommended)

Press the Mesh bu on on the central access point to start wireless mesh networking. The Internet

status indicator on each router will begin to ﬂash intermi ently (twice per second), indicating that

mesh networking pairing is in progress

Internet

Mesh bu on

Satellite node

Central access point