Idiomas disponibles
Idiomas disponibles
System Requirements
■
Windows®
●
OS: Windows® 7 / 8.1 / 10 or later
●
Available USB™ port (USB™ 2.0 is recommended)
●
CPU: Intel Pentium II processor
●
RAM: 512MB RAM or higher
●
Hard disk: Space requirement of at least 100MB
Function List
■
Function Behavior for
Operation System
Keyboard & Mouse Control Switching
Use mouse middle button
Use the mouse to move off
the edge of the screen
Hotkey Toggle [Alt+S]
Keyboard Control Sharing
Clipboard Sharing
Auto share
Data Transfer
Drag and Drop
GETTING STARTED-macOS®
■
1. Connect one end of the Wormhole Switch™ to a standard USB™
port on one of the two computers. And connect the other end of
the Wormhole Switch to a USB™ port on the second computer.
2. When you initially connect the Wormhole Switch™ to the macOS®
computer a window will pop up that says, "Keyboard Setup
Assistant", follow the steps to select the keyboard Type.
2-1.Tip: You also can change the setting, Go to "System Preferences"->
"Keyboard"
-> "change the keyboard Type"
3. After the Wormhole Switch is plugged in the "Wormhole"
CDROM icon
will
appear either on the desktop or on the "Macintosh HD".
Double click on the "Wormhole"
icon.
4. When the Wormhole Switch™ is connected properly the
wormhole launch page will be shown.
And the icon
will appear on the bar.
macOS®
●
macOS® X 10.6 or later
●
Available USB™ port (USB™ 2.0 is recommended)
●
CPU: Power PC G4 processor or later
●
RAM: 512MB RAM or higher
●
Hard disk: Space requirement of at least 100MB
Windows® to Windows®
macOS® to macOS®
Windows® to macOS®
Yes
Yes
Yes
Yes
Yes
Yes
2-2
2-3
2-4
English
GETTING STARTED-Windows®
■
1. Connect one end of the Wormhole Switch™ to a standard
USB™ port on one of the two computers. And connect the
other end of the Wormhole Switch to a USB™ port on the
second computer.
2. The device will automatically start the Wormhole Switch™
software installation on both computers.
3. An "AutoPlay" option window may appear. Please click on
the option "Run WKMLoader.exe"
Troubleshooting:
If auto-run is not launched, please follow the steps:
A. Insure both computers are properly connected to the
USB™ cable.
B. Go to My Computer and double-click the j5 Wormhole
Switch icon (
) to start the application.
4. If the "User Account Control" window appears on the
screen, Click "Yes" to continue.
5. When the Wormhole Switch™ is connected properly the
wormhole launch page will be shown.
And the icon
will appear on the bar.
SOFTWARE INSTRUCTIONS
■
To begin set up, please click Wormhole Switch Utility Icon Function (
macOS®
● Preference Setup
Others
Show Connection Information
■
Un-checking this setting means the launch page will not be shown when you start up the device.
*This option is only available in macOS® Computers
Resident This Application
■
When you choose this setting the Wormhole Switch™ program automatically sets up every time you plug in the
Wormhole device.
Enable Access for System Hotkey
■
Choose this setting to activate the Hotkey function. *This option is only available in macOS® Computers
Double Click the System Tray Icon to Turn Sharing On/O Temporarily
■
Enable/disable the clipboard sharing and Keyboard and Mouse control functions by
simply double clicking the icon (
*This function is only available in Windows® Computers
Send Ctrl-Alt-Del to another computer:
■
This option allows for alternative key options for the [Ctrl-Alt-Del] command for the second computer.
*This function is only available when 2 Windows® OS Computers are connected.
● Check New Update/ Online Update
Check and update the latest version of software for Wormhole.
1. Please make sure your network is available and Do Not unplug the Wormhole during the driver update.
2. Remove the Wormhole cable from the slave computer.
3. Select "Check New Update" or "Online Update"
4. After you have finished the installation process, re-plug the Wormhole device into both computers.
*For v10.12 User: Please click OK when you see the pop up window. Go to security and
privacy > general and then click on Open Anyway to install the driver.
● Quit USB™ Switch / Exit:
The Wormhole device can be uninstalled in the Confirmation box.
● If you have any qutestion with the function please see the
function description from www.j5create.com
), found in both macOS & Windows® System
Windows®
) on the bottom right hand side of the taskbar
