Outsunny 848-062V00 Manual De Instrucciones página 6

GENERAL MAINTENANCE
To ensure longevity of your cleaner some basic maintenance is required.
1. Periodically check the batteries for any sign of leakage, for prolonged storage
remove the batteries.
2. Rinse the cleaner of after use with fresh water to prevent chemical damage.
3. Ensure the filter is clean after each use.
4. Never leave out in direct sunlight.
5. When testing the cleaner never run the motor out of water.
6. Never take the pump apart without prior consultation with the manufacturer.
TROUBLE SHOOTING
When the cleaner doesn't work, please pay attention to the following solutions.
1. Ensure positive ends of the batteries interface with the positive contact.
2.Ensure the battery compartment is clean before each use, especially the positive
and negative contacts.
3. Hold the Assembly and Rotate it anticlockwise by
about 30° until you feel it stop.
4. Pull of the filter screen and take out the debris.
5. Line up the notches and slide the filter screen onto
the assembly and gently rotate the assembly
clockwise 30° turn until the filter screen locks into
place. Rinse out any fine silt and flush any grit from
the assembly.Make sure the seal ring inside the End-
Cup Assembly is flat and no grit on it.
6. Rotate End-Cup Assembly back into body and lock
tight.
5