Idiomas disponibles
Idiomas disponibles
BEFORE USE
First read all instructions before use and retain the manual for later reference. Only plug this appliance into an
earthed socket. Before first use, remove the packing materials. Clean the basket and frying grill. (See "cleaning
and maintenance") Wipe inside and outside of the appliance with a soft cloth. Make sure that the electrical
parts remain dry. This appliance heats food at all directions and most of the ingredients do not need any oil.
Operate the appliance before first use for approximately 10 minutes in order to burn off production residues.
Make sure there is good ventilation. The appliance may emit some smoke and a characteristic smell when you
switch it on for the first time. This is normal and will stop soon.
Note: Always use the frying grill with the silicone feet attached. They will help to stabilize the frying grill in the
basket during cooking.
USE
1.
Place the appliance on a dry, stable and heat-resistant surface.
2.
Since the appliance becomes hot during use, make sure that it is not too close to other objects.
3.
Pull out the basket from the appliance by the basket handle. Put the frying grill into the basket.
4.
Place the ingredients into the basket. (Do not exceed the MAX level indicated inside the basket.) Slide the
basket into the appliance. Make sure they are placed correctly and closed completely.
Caution: Do not fill the basket with oil or any other liquid. Do not touch the basket during use or after use
in short time as it gets very hot. Only hold the basket by the handle.
5.
Connect the power plug to a suitable outlet. The machine is now standby.
6.
Press the "Temp/Timer" button, you can switch the setting for temperature or timer; current
temperature or timer will show on the Timer / temperature display; Press "
desired temperature (5 degrees / press) and time (1 minute / press) for the ingredients. You can also long
+
-
press "
" or "
" for rapid adjustment.
7.
You can also press the function button to directly choose your desired setting among the default menus. If
you wish to adjust the time and temperature a little, please press "Temp/Timer" button and "
button to make adjustment.
8.
Press the Start/Cancel button once or wait for a few seconds after setting, the appliance starts working.
9.
When the whole cooking process is finished, the timer will ring. You can press the "Start/Cancel" button
during the operation to stop working. Long press the "Start/Cancel" button can cancel the set program.
10. Pull out the basket from the appliance by the basket handle. Check if the ingredients are ready. If not,
simply slide the basket back into the appliance. Set the temperature and the timer to a few extra minutes.
Then press the "Start/Cancel" button to run the machine again. NOTE: You can also pull out the basket to
check and shake the ingredients during cooking process. When you slide back the basket, the machine will
continue to work with the selected setting.
11. To remove ingredients (e.g. beef, chicken, meat) with original oil and will have excess oil collected on the
bottom of the basket during frying, please use tongs to pick ingredients one by one;
To remove ingredients (e.g. chips, vegetable) with no excess oil collected on the bottom of the basket
during frying, please pull out the basket, and pour ingredients to tableware.
Note: The basket and the ingredients are hot after frying. Depending on the type of the ingredients in the
appliance, steam may escape from the pan.
12. After the cooking is done, the appliance is instantly ready for preparing another batch of ingredients if
needed.
Reservation Function
This appliance has a reservation function.
1)
Set your desired program.
2)
Press the "Delay Time" button, then press "
+
-
" or "
" to set the delay time from 10 minutes to 24 hours.
- 6 -
+
-
" or "
" button to set your
+
" or "
-
"
