Installation Instructions - Volvo Penta 3594745 Instrucciones De Montaje

Components
Accessory relay

Installation instructions

Note: screws, washers and tie wraps are not included.
Installation instructions
Important! The main circuit breaker must be in the
"off" position before work is begun.
Important! The accessory relay must not be at-
tached to the engine.
NOTE: Max 1 accessory relay may be used on Multilink.
The relay controlls the power supply to external acces-
sories.
The adapter wiring is connected between the MDI and
the instruments on the Multilink. See illustration.
The relay is activated via the on/off button on the MDI
keypad.
Maximum current through the relay is 20 A. A fuse must
be present in the circuit between the battery supply and
the relay.
The wire splices are crimped onto the wires and then
heated to shrink the casings to protect the joints from
moisture.
Accessory relay
Quantity
1
1
MDI Mechanical Diesel Interface
MULTILINK
Adapter wiring
SB
R = red
W= white
SB = solid black
Accessory relay
SB
R
MULTILINK
Accessory relay
R
W
Electrical supply
to accessories.
W
Battery supply (+)
Wire splice
Electrical supply
to accessories.
Battery supply (+)
Fuse.
Max 20 A.