Idiomas disponibles
Idiomas disponibles
Key Lock
The key lock automatically activates
after the timer has not been used for 7
seconds. " " symbol will appear and remain
illuminated. To unlock the timer buttons,
press and hold the "MODE" button for 2
seconds. The desired operation can then be
carried out.
Audible warning time adjustment
The audible warning time can be set to any
time between "00:00" and "23:59" hours.
The audible warning time is for warning
purposes only. The oven will not
be activated with this function.
When the timer reaches zero, an audible
warning will sound and the symbol " " will
2. Adjust the time while
the dot is flashing
using the "+" and "-"
keys.
3. After a few
seconds, the dot will
stop flashing and will
remain illuminated.
1. Press "MODE". The
symbol " " will begin to
flash and "000" will be
displayed.
2. Select the desired
time period using the
"+" and "-" keys while
" " is flashing.
3. The symbol " " will
remain illuminated, the
time will be saved and
the warning will be set.
flash on the
display. Press any key to stop
the audible warning. Press "MODE" for 2
seconds the " " symbol will disappear and
the clock will be displayed.
Semi-automatic time adjustment
(cooking period)
4.3 Accessories
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
5
4
3
2
1
•
Insert the accessory to the correct
position inside the oven.
•
Allow at least a 1 cm space between the
fan cover and accessories.
•
Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
•
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
•
Trays and wire grids can be positioned
on any level from 1 to 5.
•
Telescopic rails can be positioned on
levels T1, T2, 3, 4, 5.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for the turnspit wire
grid positioning with telescopic rails.
****Accessories may vary depending on the
model purchased.
EN - 1
T2
T1
