Idiomas disponibles
Idiomas disponibles
Do not use abrasive cleaning agents, scourers or aggressive
•
liquids such as alcohol, gasoline, or acetone to clean the Trimmer
and attachments.
Never clean, replace or remove Trimmer comb with motor ON.
•
Do not apply pressure to cutters.
•
Do not touch cutters with hard objects as this may damage them.
•
Use a soft, dry cloth to clean Trimmer handle.
•
During Use:
If cut hairs have accumulated in the comb area, turn Trimmer off,
•
pull the comb off Trimmer and remove hairs by shaking, blowing or
using cleaning brush provided.
After Each Use:
1. Make sure the Trimmer is switched OFF and disconnected from
the electrical outler.
2. Remove the Trimming Comb and clean with the brush.
3. Remove the cutting unit by pushing against the teeth of the
cutting unit (fig. 11) and rinse under warm tap water (fig. 12) or
use the brush supplied.
Allow to air dry thoroughly.
4. Place the cutting unit back by inserting the notch of the cutting
unit into the guiding slot (fig. 13).
CASTELLANO
ENGLISH
15
