Idiomas disponibles
Idiomas disponibles
Harness
1.
Insert the fastener components into the main buckle (fig. 11). A correct
connection will signal a click.
2.
Adjust the length of the harness to the child's body using the buckles located
on the straps (fig. 12).
3.
To unbuckle the harness, press the button located in the buckle (fig. 13).
Harness adjustment
To adjust the harness, remove the buckle through the hole located in the seat
and put it in the desired place.
Make sure that the buckles are in the correct, stable position after repositioning.
Installation and removal of the safety bar
1.
Insert the safety bar into the connectors on the stroller frame (fig. 7). Correct
installation will signal a click.
2.
To remove the safety bar, press the release buttons located on the inside
of the frame. Push the buttons independently on both sides of the stroller,
then pull out the safety bar.
Footrest adjustment
1.
To lower the footrest, press both adjustment buttons (fig. 8) and set the
footrest to the desired position.
2.
To raise the footrest, lift it and move it to the desired position.
A click will signal that the footrest is locked in the selected position.
Seat adjustment
Note! Do not adjust the seat when there is a child in the stroller.
To change the position of the seat, use the buckle located on the adjustment
strap at the back of the backrest (fig. 9).
1.
Slide the buckle down to the end of the adjustment strap to adjust the seat
to the reclining position.
2.
Slide the buckle upward to adjust the seat to a sitting position.
Parking device
Press to lock the wheels and stop the stroller. Lift to unlock (fig. 10).
EN
‑ 10 ‑
