Idiomas disponibles
Idiomas disponibles
8. If there is no water in the tank, the indicator light (D) will light up on
the display. If necessary, refill the tank with water as described in
point
1. Water can also be added during operation.
9. Before disconnecting the unit from the power supply, lower the
pressure inside the unit.
To do this, press the button (8) and then press the trigger (b) on the
handle to expel the steam.
10. Set the On/Off button to the "0" position. Disconnect the unit from
the power supply.
INSTRUCTIONS FOR USE
•
When cleaning a surface for the first time, testing in the least visible place to
check whether the surface is steam resistant is recommended.
•
Before cleaning after starting the machine, remove the condensed water
from the steam hose by pressing the trigger on the handle.
Adding detergents, fragrances, etc. to the water in the tank is prohibited. This
•
can damage the machine.
Avoid kinks in the steam hose.
•
Refilling the tank with hot water is prohibited! Pouring hot water may deform
•
the tank.
Always turn off the device when not in use, before moving it to another
•
location and when emptying the water tank.
Using distilled or demineralized water is recommended.
•
Using tap water may cause limescale to build up in the unit, resulting in
reduced performance.
