Idiomas disponibles
Idiomas disponibles
STEP 1
Place the bottom hub onto
the bottom of the tray. Use a
3/32" drill bit to pre-drill the
holes and using (4) 3/4" x #8
oval head screws affix it to the
tray. (See Figure 1).
#2
#2
#2
STEP 2
Flip the shelf over and affix
the shelf support top to the
bottom shelf support using (3)
1-1/4" x #8 flat head screws
(See Figure 2).
#2
#2
#2
STEP 3
Repeat the steps for the other
shelf or shelves.
STEP 4
Using the tape measure, mark
the center of the opening
of the cabinet, then use
a combination square to
determine your hub location.
The enclosed template will
determine the depth location
of the bottom positioning hub.
(See Figure 3).
2
3
32
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
FIG. 1
FIG. 2
