DURAVIT 2x3 700023 Instrucciones De Montaje página 7

These mounting instructions comes as part of the Duravit
bathtub and should be read carefully prior to installation.
In the case of potential damage to property
Link to
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
The bathtub must only be installed by trained plumbing
engineers.
Local installation regulations and any country-specific
standards must be observed at all times.
The connection hose #790159/ #790166 is
recommended for installing a cable-driven waste
and overflow with a bathtub spout and base inlet.
Area: drain and overflow fittings
Dimensions of the inspection hatch
for drain fittings: min. 20 x 20 cm
Sealed to avoid spray water
Only to be opened with a tool
in this section
BA_M_Einbau_Fliesen_Rechteck/17.05.7
7