Idiomas disponibles
Idiomas disponibles
6
Identify the Right/Passenger Front Bracket.
See Figure 6
7
Place the Right/Passenger Front Bracket onto
the frame as shown in Figure 7.
Install a 10mm washer, lock washer and nut on
the bolt plate and reinstall hte Factory bolt for the
skid plate.
Do not tighten at this time.
8
Identify the Right/Passenger Side Rock Rail.
See Figure 8
9
With a Helper, hold the Right/Passenger
Side Rock Rail up to the frame. Position the
brackets over the middle and rear body mounts,
positioning the studs through the brackets.
Secure using the original nuts. Leave hardware
hand tight at this time.
See Figure 9
10
Bolt the Rock Rail to the Front Bracket using
the provided 10mm bolts with flat washers, lock
washers and nuts. Leave hardware hand tight at
this time.
See Figure 10
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Page 3 of 4
