Idiomas disponibles
Idiomas disponibles
B
Product usage
Button
Control panel
Remote control
Timer
Press to enter the auto-on/auto-off timer setting mode.
The time can be set in 30-minute intervals from 0.5 to
9.5 hours, then in 1-hour intervals from 10 to 12 hours.
Auto-on:
This function allows you to delay the time upon which
the unit switches on.
• Press the
button when the unit is in Standby mode
to set the auto-on timer. The
turn on and the duration "0.0" will flash for a few
seconds on the settings screen.
• Press
/
to set the desired auto-on time (0.5 -
12 hours).
• The settings screen will then display the main
parameters, indicating the last used settings as far
as speed, fan mode and oscillation (if enabled) are
concerned; these will flash for a few seconds. These
settings can be adjusted if desired.
• When you have finished with the settings, the main
display screen will reappear: the set time
addition to the fan mode and oscillation indicators
(if enabled) will light up for approximately 1 minute.
Auto-off:
This function allows you to delay the time upon which
the unit goes into Standby mode (switches off).
• Press the
button when the unit is on to set the
auto-off timer. The
the duration "0.0" will flash for a few seconds on the
settings screen.
• Press
/
to set the desired auto-off time (0.5 -
12 hours).
• When you have finished with the settings, the main
display screen will reappear: the
be lit, in addition to the fan mode and oscillation
indicators (if enabled) to indicate that they are in use.
To cancel a programmed auto-on or auto-off:
• Press the
button or
• press the
button, followed by
returns to "0.0".
25
EN
Function
indicator light will
indicator light will turn on and
indicator will
/
until the time
, in
