Technical Specifications; Guarantee Conditions - Qlima LK 2100 Instrucciones De Uso

TECHNICAL SPECIFICATIONS

Model Voltage
LK2100 AC220-
240V,50Hz
Remark:
1.The above datum are for reference only. Users should refer to parameter on the rating label.
TROUBLESHOOTING
Problem
No air flow
Fail to shutdown the Fan
Abnormal sound from
Product body
No damping
Air flow direction can not
be controlled

GUARANTEE CONDITIONS

4
48
Input Noise Water
Power Power Tank
Level Capacity
130W 67dB(A) 12.0 l
Cause
1. Power is not connected.
2. Power is not turned ON.
3. Body damaged.
1. Stop key has not been pressed
yet.
2. Body damaged.
1. Foreign article inside the body.
2. Loose air wheel.
3. Motor defect.
1. Defective pump or motor.
1. Defective front synchronization
motor.
The appliance is supplied with a 24-month guarantee, commencing on the
date of purchase. All material and manufacturing defects will be repaired or
replaced free of charge within this period. The following rules apply:
1. We expressly refuse all further damage claims, including claims for collate-
ral and/or consequential damage.
2. Repairs to or replacement of components within the guarantee period will
not result in an extension of the guarantee.
3. The guarantee is invalidated if any modifications have been made, non-
genuine parts are fitted or repairs are carried out by third parties.
4. Components subject to normal wear, such as filters, batteries, lamps and
heating elements are not covered by the guarantee.
5. The guarantee is valid only when you present the original, dated purchase
invoice and if no modifications have been made to it.
6. The guarantee is invalid for damage caused by neglect and/or by actions
that deviate from those in this instruction booklet.
7. Transportation costs and the risks involved during the transportation of the
appliance or components of the appliance shall always be for the account
of the purchaser
Air Flow N.W. Dimension(mm)
Rate L X W X Hdel
1200m³/h 8.5 kg 380x290x920
Solution
1. Plug the power cable properly.
2. Press the power key to start.
3. Return to Service Center.
1. Press key Start/Stop.
2. Return to Service Center.
1. Remove rear cover and strainer,
remove foreign articles.
2. Return to Service Center.
3. Return to Service Center.
1. Return to Service Center.
1. Return to Service Center.