Idiomas disponibles
Idiomas disponibles
6. Turn on the ultrasound under the normal cleaning mode and run for 1 minute. Stop it once
the time has been reached.
7. Remove the foils and inspect. The foils should be perforated or knocked off along the 3 edges.
8. If any one of the foils has no obvious perforations, the transducer near that foil may not be
working properly. Call Henry Schein® Handpiece & Small Equipment Solutions if this happens.
9. Flush out the loose foil particles from the tank and clean it thoroughly.
TROUBLE SHOOTING
Problem
Warning symbol is on;
the unit has been running
extensively.
Warning symbol is on;
Warning symbol doesn't
turn off after unit is left
idling for 15 minutes.
Unit isn't draining properly.
Unit is beeping.
Unit is not turning on.
SPECIFICATIONS
Description
Model
Tank Capacity
Tank Size
Longest Item Fits inside Tank
Power Supply
Cause
At least one of the transducers
is under overheat protection.
At least one transducer is not
working.
Debris is caught in hose.
Unit is running but the lid is off.
The power cord may be loose or
detached.
Ultrasonic Cleaner
Maxima PowerClean 210
8.0L /
2.1 gallon (US)
33.1x23.8x11.6 cm / 13.0"x9.4"x4.6"
37.0 cm / 14.4"
240W AC 100~120V 60Hz
240W AC 220~240V 50Hz
Solution
Stop the unit for 15 minutes
or more until the warning
symbol dims before resuming
operations.
Contact Henry Schein Hand-
pieces & Small Equipment
(pg 8).
Detach the drainage hose and
fl ush out any debris in hose
and inside the unit.
Place the lid back the unit.
Check the power cord and
ensure power is coming from
the outlet it is plugged into.
Max. 7.0 L / 1.8 gallon (US)
Min. 3.6 L / 0.95 gallon (US)
Maxima PowerClean 210 - 7
