Idiomas disponibles
Idiomas disponibles
Now put the wall plugs
Attach the camera
If the cameras
device, the cable must go through atleast one wall.
Proceed as follows:
Set up the extension cable plug
a a thin thread to the last plug (Fig. C).
Feed it through tube (Ø ¾ or 19 mm) and carefully slide in the
connector plugs (Fig. D).
Drill a 20 mm hole in the wall push the tube from the outside to the
inside (Fig. E).
Carefully pull the connector plug out of the tube (Fig. F). Leave the
tube in the drilled hole.
Now pull the entire extension cable
it to the AV device as desired. Always be sure to lay the cable
safely.
Hooking up the camera
Note: If the AV device is not designed for Cinch connectors, you can
use a SCART Adapter (not included).
Connect the camera
Attach the extension cable
video inputs of the AV device (Fig. G/a).
Attach the extension cable
Plug the power supply
Attach the AV device to the correct input signal. The AV device will
now display the camera image.
into the drill holes.
6
to the wall with the screws
1
must be mounted in a different room to the AV
1
to the extension cable
1
to the white = audio and yellow =
4
to the mains adapter
4
into the mains socket.
7
behind the device and attach
4
through the tube and route
4
4
(Fig. B).
5
(note colours).
(Fig. G/b).
7
GB/IE
27
