Worx WX852 Manual De Instrucciones página 13

7. Seventh press turns entire unit OFF .
Note: While in any of the above work light modes, you can turn the unit OFF by
pressing and holding the Power Button for four seconds. The power indicator
will automatically turns off after 10 minutes.
NEW SMART CABLE SPECIFICATION
Operations
Low Voltage Pro-
tection
Low Voltage Over-
ride Function
Over Voltage Pro-
tection
Reverse Polarity
Short-circuit
Reverse Charge
Protection
Smart cable connects
to car battery first,
then plugs into the
jump starter
Smart cable plugs
into the jump starter In Standby Mode
Cable Right
Connection
Smart cable
disconnects to the
car battery
Jumping time
limited
MULTI FUNCTION 4L JUMP
STARTER WITH LED LIGHTS
Standards
Lithium BV<10V+/-0.3V
Vehicle BV<4.5V
Vehicle BV: 2V - 4.5V
Vehicle BV > 15V
Reverse Polarity
Protection
Short-circuit Protection
Reverse Charge
Protection
Work normally
Work normally
Automatic detection to
the standby mode
Maximum 60s, then shut
down
LED Indicator
Red LED Blink with Buzzer
Shout;0.5s
Push the button in 4s, the
Green LED Solid Lighting.
Red LED Blink with Buzzer
Shout;1s
Red LED Blink with Buzzer
Shout;0.1s
Red LED Solid Lighting and
Buzzer Shout in Rapidly
Blue LED Blink with Buzzer
Shout, 0.5s
Green、RED、BLUE LED Solid
Lighting
Blue LED Blink
Green LED Solid Lighting
Blue LED Blink
After 60s, it will automatic
protect. The Blue LED Blink
with Buzzer Shout, 0.5s
13
EN