Idiomas disponibles
Idiomas disponibles
6.4.
Installing the temperature sensors
90 °C
60 °C
40 °C
First housing shell
Ñ
Screws 3.5 x 20 mm
Temp/STL
D
Install the Temp/STL sensor centrally
above the sauna heater.
Temp
D
Install the Temp sensor centrally on the
cabin wall above the bench.
1.
Drill the 10-mm diameter hole for running
the wiring in the cabin interior as shown in
the installation diagram.
2.
Run the wire.
Position the vent slots vertically to fasten
the housing in place.
3.
Screw the first housing shell to the cabin
wall.
Screws (3.5 x 20 mm).
Page 18 / 104
