Idiomas disponibles
Idiomas disponibles
GB
Open the protective cover (4) to access the ports of the
power bank. Connect the device to be charged to a USB
cable, and this to the USB-A output of the power bank.
The charging process will begin. Disconnect the cable
from the powerbank after use.
Note: If a short circuit occurs while charging a de-
vice, the powerbank will shut down. Plug the cable
into the Micro-USB or Type-C input of the power-
bank, and connect the USB-A plug of the cable to a
USB charger or a computer. A short charging pulse
is enough to reactivate the powerbank.
LED Light:
The integrated LED light (12) is operated by the power
button (8). To switch on and off, press and hold the
power button for approx. 3 seconds.
If you need technical support, please contact our
support team by email at [email protected].
7
Technical data:
• Battery: 10,000 mAh Li-Polymer
• Micro USB/Type-C input: DC 5V/2.0A
• Charging power solar panel: Max. 1.2W
• Output USB-A: DC 5V/2A
• Output cable with Micro USB/8-pin/Type-C: DC5V / 2.0A
• LED charge level indicator
• Protection against: short circuit, overcharge, discharge,
overcurrent.
• Material case: ABS + silicone
• Dimensions: 168 x 77 x 22 mm
• Weight: 310g
Safety advice:
• Do not open the device.
• Do not hold the device under water.
• Keep it safe from humidity.
• Do not connect the power output to the power input or
vice versa.
• Do not connect the adapter to the device by using
force.
