Idiomas disponibles
Idiomas disponibles
8.
Maintenance and Cleaning
8.1.
Softclima
Note!
Only allow work to be done on electrical components/assemblies by qualified
electricians that work in accordance with the prevailing electrotechnical rules and
regulations.
Evaporator - draining
1.
Place the filler can (1) under the discharge
opening (2). Open the drain valve (3).
2.
As soon as the evaporator is empty, close the
drain valve (3).
3.
Empty the filler can (1).
Evaporator - decalcifying
4.
Remove the cover (4) of evaporator.
5.
Fill the evaporator unit (5) with water.
6.
Add approx. two tablespoons of normal
household decalcifier (chlorine-free!) to the
evaporator unit (5).
7.
Allow the decalcifying mixture to work overnight
(at least 12 hours) on the calcified deposits. The
decalcifying process can be easily repeated
2 - 3 times for the same length of time to ensure
that the entire calcium deposit is dissolved.
8.
Place cover (4) back on evaporator.
9.
Place the filler can (1) under the discharge
opening (2). Open the drain valve (3). Drain
water into the filler can (1).
Evaporator - rinsing
10. Close the drain valve (3).
11. Remove the cover (4) of the evaporator.
12. Fill the evaporator unit (5) with water.
13. Place the filler can (1) under the discharge
opening (2). Open the drain valve (3).
14. After draining the evaporator, close the drain
valve (3).
15. Repeat the rinsing procedure two or three times.
16. Place cover (4) back on evaporator.
PAGE 16
3
4
1
Softclima
2
1
5
5070145/05.09
