Idiomas disponibles
Idiomas disponibles
Problem
The iron
leaves a
shine or an
imprint on the
garment.
The steam
generator
does not
produce any
steam.
The steam
generator
produces
a pumping
sound.
Vertical vacuum cleaner | Aspiradora vertical | Aspirador vertical
AF Manual ferro caldeira BSS4426 A5.indd 19
AF Manual ferro caldeira BSS4426 A5.indd 19
Possible cause
The surface to
be ironed was
uneven, for
instance because
you were ironing
over a seam
or a fold in the
garment.
There is not
enough water in
the water tank
(the 'water tank
empty' light
flashes).
The steam
generator is not
hot enough to
produce steam.
You did not press
the steam trigger
The water tank
is not placed
properly in the
steam generator
This is normal
because the
water is pumped
into the boiler
inside the steam
generator.
Solution
Perfect Care is safe on all
garments. The shine or imprint is
not permanent and will come off
if you wash the garment. Avoid
ironing over seams or folds or
you can place a cotton cloth over
the area to be ironed to avoid
imprints.
Fill the water tank and press the
steam trigger to let the appliance
heat up again. When the 'iron
ready' light stays lit, you can
continue steam ironing.
Wait until the 'iron ready' light on
the iron lights stays lit.
Press the steam trigger and keep
it pressed while you iron.
Slide the water tank firmly back
into the steam generator ('click').
If the pumping sound continues
nonstop, switch off the steam
generator and unplug the unit
from the mains. Contact an
authorised service centre.
EN
19
20/03/2020 11:21
20/03/2020 11:21
