Monster Oron Guia De Instalacion página 2

STEP 2
STEP 1
Remove 4 screws which is located
Turn base plate of your
underneath the base plate. Line
gaming seat upside down.
up the screw holes of the base
plate with the holes in the height
adjust mechanism. Finally, screw
the mechanism into the base
plate using the 4 screws.
Representative Product
STEP 4 STEP 5
Base and back plate Place the shock absorber into
installation is complete. the middle of the reinforced
metal foot, then attach the
5 wheels to the metal foot
as shown in the picture.
Representative Product Representative Product
Please proceed with the assembly steps according to instructions.
The armrests on the seat may differ depending on the models.
In the diagram, the mechanism, screw hole locations etc. parts may differ by models.
Depending on the model, the arm connection holes of your seat can be 2-3-4 holes.
Shock absorber is delivered wrapped together with the metal legs.
The allen keys comes in a pack, wrapped in the armrest.
Screws are already attached in the seat. To install the parts, start by removing the screws
from the screw holes.
In order to solve problems regarding the gaming seats covered by warranty, please provide name-surname,
a short video describing the problem, the invoice image or the e-commerce site order, telephone and adress
information to [email protected]
STEP 3
Screw the plate, which is
connected on the bottom of the
backrest, into the base plate.
Attention : You must mount the plate
into the base plate with 4 screws.
Representative Product Representative Product
STEP 6
Place the shock absorber into
the middle of the mechanism
that installed on your gaming
seat and the setup is complete.
Representative Product