Ghibli & Wirbel WDA Uso Y Mantenimiento página 11

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
Reception frequency
Sensitivity (finely tuned signal)
Carrier frequency
Apparent radiated power
Power supply (lithium battery)
INTRODUCTION
WARNING:
Before using the appliance, carefully
read this manual.
This manual is an integral part of the
product itself; it must therefore be care-
fully stored in a safe place accessible to
all users (operators and maintenance
personnel) for the entire life of the prod-
uct until demolition.
Purpose of the manual
The purpose of the manual is to pro-
vide the necessary instructions for
commissioning, use and maintenance
of the product to which it is attached.
Careful reading of the instructions and
scrupulous observance of the safety
rules described in the manual are rec-
ommended.
Failure to comply with these instruc-
tions / standards could cause dam-
age to the appliance and to the op-
erator and in no case can they
be attributed to the manufacturer.
TECHNICAL SPECIFICATIONS
REMOTE CONTROLLER
RECEIVER
10...-7dBm (100-200 μW)
The safety instructions described in the
manual supplement and DO NOT RE-
PLACE the regulations in force in the
country where the appliance is used.
Consultation of the manual
The manual is divided into chapters ac-
cording to a logical order of knowledge
and use of the device.
Symbology legend in the manual
To highlight information and procedures
relating to safety, maintenance, etc., the
following symbols have been used in
the manual:
DANGER:
Warns of a serious danger, even fa-
tal, for the safety of the operator and
/ or third parties.
WARNING:
Extremely important information to
avoid serious damage to the appli-
ance and the environment in which it
operates.
ENGLISH - 1
433,92 MHz
110dBm 0,7μV
433,92 MHz
3V (1 x CR2032)
loading