Idiomas disponibles
Idiomas disponibles
EN
6.1 INSTRUCTIONS dedicated TO peak AND TRANSPARENT VISOR
HOW TO REMOVE
Remove the visor by unhooking it using
the special support.
HOW TO REMOVE FROM THE BACK
Remove the back lining by pulling the
rear section to release the plastic
buttons.
HOW TO ASSEMBLE FROM THE FRONT
Insert the plastic part into the
designated slots along the plastic
frame.
21
6.2 INSTRUCTIONS dedicated to INNER LINING
HOW TO INSTALL
Attach the visor using the special
support.
HOW TO REMOVE FROM THE FRONT
Remove the front by gently releasing
the inside along the frame. To facilitate
the operation, start from the side of the
frame.
HOW TO ASSEMBLE FROM THE BACK
on the back of the helmet fasten the
two plastic buttons.
