instaflation
Caution:
During the following
step,
hold unit firmly until window
sash
is lowered to top channel behind side panel frames, Personal injury
or
property damage may result if unit falls from window.
1. Install the air conditioner in the window
1ol. Carefully lift the air conditioner
and
slide it into the open window. Make
sure the bottom guide of the air
conditioner
drops into the notches of
the L bracket.
: When the air conditioner drops
into the L bracket, the air conditioner
will be cent:ered in window opening.
i!)i¸i¸_':'_'
.....
!1
-2
While steadying the air conditioner,
carefully bring the window sash
down behind the upper guide of the
air conditioner.
When the air conditioner
is propedy
installed, it should tilt slightly down at
the back. If it is set correctly in the
window, it wiii hang lower in the back
automatically,
if it does not, there is a
probl,em with the installation.
2. S_ure
the guide _neis
Extend the guide panels (Type F) to
filli the window opening using 4
screws (P/pe B) to secure them.
3 install
tlhe _sh
seal and sash lock
3-1.
3-2,
Cut the sash seal (Type E) to the
window width Stuff the sash seal
be_een
the glass and the window
to prevent air and insects from
geeing into the room.
Fasten the L bracket using a screw
(Type A),.
3-3. Remove the screws that secure the
cabinet and base pan in the right
side.
_®'1:/4 °
14
Room Air ConditioRec