Operating Instructions; Remote Control Instructions; Power Button; Down Button - Kenmore KH-7E01-SSTP Manual De Uso Y Cuidado

OPERATING INSTRUCTIONS

PRODUCT KEY FUNCTION
LED Display:
1. Turn on the power button, the product is in standby mode display (- -).
2. Press heating level button: Select the heating level (L1 - L2 - L3 - standby - off).
3. Press timer button: To set the timer from 0H - 24H, which is the number of hours it will run.
0H will display and then adjust to the number of hours you would like to set.
4. Error-over heat protection (E1).
Button switch:
1. Plug in the heater to an outlet.
2. Turn on the button switch
3. Adjust the heating level L1-L3 by repeatedly pressing the button switch

REMOTE CONTROL INSTRUCTIONS

the product is in standby mode display (- -).

POWER BUTTON:

01.
Turn the heater off.
02. UP BUTTON:
Increase timer or power level.
03.

DOWN BUTTON:

Decrease timer or power level.
04.
LEVEL BUTTON:
Use to adjust the heat levels(L1 – L3).
Press the Level button then use the up and down buttons
(2 & 3) to increase or decrease the heating level.
05.
TIMER BUTTON:
To set the timer from 0H - 24H, which is the number of
hours it will run. 0H will display and then adjust to the
number of hours you would like to set, using the up and
down buttons (2 & 3).
22
.