Idiomas disponibles
Idiomas disponibles
GB
2. The attachment automatically slides out of the brush housing a little.
3. Remove the brush roll.
4. Remove any dirt from the brush roll. Rinse under running water if necessary.
5. Allow the brush roll to dry completely before reinserting it.
6. Put the brush roll back into the housing. Make sure that the positioning is correct.
7. Turn the attachment clockwise until it is level with the housing again.
Cleaning the motorised electric brush
1. Loosen the fastener on the underside of the brush and remove the fastener.
2. Remove the brush roll in the direction of the arrow.
3. Remove any dirt from the brush roll. Rinse under running water if necessary.
4. Allow the brush roll to dry completely before reinserting it.
5. Put the brush roll back into the housing. Make sure that the positioning is correct.
Troubleshooting
6. Replace the fastener and let it click audibly into place.
Problem
The handheld vacuum
cleaner is not showing any
sign of function.
The charging display
6
is not
lighting up.
The suction performance is
poor.
Dust is coming out of the air
vents.
Unit switches off automati-
cally and the LED indicator
on the on/off switch flashes
several times.
Motorised electric brush not
operating and light at
suction opening goes off.
30
Instruction manual
17
(Fig. K)
Possible cause
4
The battery
is discharged.
The power supply
2
is not
correctly connected to the
plug socket or to the handheld
vacuum cleaner.
The metal filter
8
or Hepa
filter
7
is blocked.
The battery
4
is discharged.
The dust container
9
is full.
8
The metal filter
or Hepa
7
filter
is damaged.
9
The dust container
is full.
The metal filter
8
or Hepa
filter
7
is not correctly
inserted.
Suction opening 10, suction
16
pipe
or brushes blocked.
7
HEPA filter
too dirty.
Motorised electric brush not
operating and light at suction
opening goes off.
Solution
4
Charge the battery
of the handheld vacuum cleaner
(see "Charging the handheld vacuum cleaner").
Ensure that the power supply is correctly inserted
3
into the plug socket
and that the power connector
is correctly inserted into the charging socket
charging base 22.
Clean the filters (see "Cleaning").
Charge the battery
4
of the handheld vacuum cleaner
(see "Charging the handheld vacuum cleaner").
Empty the dust container
9
(see "Emptying the dust
container").
Contact your local retailer to order a replacement
filter.
9
Empty the dust container
(see "Emptying the dust
container").
Re-attach the filters correctly to the handheld
vacuum cleaner after cleaning (see "Cleaning").
Check the intake
10
and brushes for dirt and remove
if necessary.
7
Clean the HEPA filter
(see „Removing the metal
filter and Hepa filter").
Make sure the dust container is correctly fixed to the
main device. The trim on the main device and dust
collector should form a straight line.
1
or
