Idiomas disponibles
Idiomas disponibles
Caution：
Be sure to turn the key switch to "ON" and push back the battery back cover before powering on the robot.
The startup location for using the laser SLAM navigation
(make sure that the robot has the correct position and
direction at the startup location):
Startup Location
Power-off：
Press and hold the power switch for 3 seconds. The bottom light strip and screen will go off, indicating that the robot is
powered off.
Pause：
Tap on the screen to pause the working robot. Tap again to resume operation. You can also press the lightning button to
pause the robot.
Emergency stop：
In case of an emergency, press the emergency stop switch to stop a working robot. Rotate the emergency stop switch
clockwise, tap on the screen or press the lightning button to resume operation.
* Refer to BellaBot Operation Guide for more information on how to use the robot.
4. Maintenance and care
Components
Trays, driving wheels, and
auxiliary wheels
Vision sensor, depth vision
sensors, and Lidar
Robot body
* Refer to BellaBot Operation Guide for more information on how to maintain and care for the robot.
OFF
ON
Key Switch
Robot Status
Inspection Interval
Power-off
Weekly
Power-off
Weekly
Power-off
Monthly
The startup location for using the visual SLAM navigation
(right below the marker):
Maintenance Method
Wipe the surface with a clean cloth
Use a clean cloth or lens cleanser for
the cleaning. In case of unexpected
contamination, address it immediately to
avoid blocking the sensor and prevent the
robot from working improperly.
Wipe the surface with a clean cloth.
04
Marker
