Idiomas disponibles
Idiomas disponibles
Error
Declaration
Speed signal of the torque sensor has
26
an error
Overcurrent from controller
27
30
Communication problem
33
Brake signal has an error (If brake
sensors are fitted)
35
Detection circuit for 15V has an error
Detection circuit on the keypad has an error
36
37
WDT circuit is faulty
41
Total voltage from the battery is too high
42
Total voltage from the battery is too low
43
Total power from the battery cells is too high
44
Voltage of the single cell is too high
45
Temperature from the battery is too high
The temperature of the battery is too low
46
47
SOC of the battery is too high
48
SOC of the battery is too low
61
Switching detection defect
62
Electronic derailleur cannot release.
Electronic lock is jammed
71
Bluetooth module has an error
81
21
Troubleshooting
1.Check the connector from the speed
sensor to make sure it is connected
correctly.
2.Check the speed sensor for signs of
damage.
3.If the problem persists, please contact the
Support.
Please contact the Support.
1.Check all connections are correctly
connected.
2.If the error persists, please contact the
Support.
1.Check all connectors.
2.If the error continues to occur, please
con¬tact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support.
Please contact the Support. (only with this
function)
Please contact the Support. (only with this
function)
Please contact the Support. (only with this
function)
Please contact the Support. (only with this
function)
