Idiomas disponibles
Idiomas disponibles
GENERAL INFORMATION
Make sure to use the studs in your wall before mounting the wall plate.
Do not mount this product into the drywall
▶Distance min / max. the wall: 80-210mm
▶Arm swivel angle, left and right: 180º
▶Tilt angle: -15º/+15º
PARTS INCLUDED
A. M10X50 (2u)
B. M8X50 (2u)
C. M8X25 (4u)
D. M6X20 (4u)
E. M5X20 (4u)
F. M4X20 (4u)
G. M6X10 (8u)
H. M8 (4u)
I. M6 (12u)
J. M4 (4u)
K. M6 (8u)
WARNINGS
▶1. The wall or mounting surface must be capable of supporting the
combined weight of the mount and display; On the contrary, the
structure must be reinforced.
▶2. Locate any pipes, cables, or any other obstacles in the wall where
you are going to install the bracket before drilling.
▶3. Appropriate tools and safety equipment must be used. Failure to
do so may result in injury or damage.
▶4. We recommend two people for installation. Do not attempt to lift a
heavy screen without assistance.
▶5. Follow all instructions and recommendations regarding proper
ventilation and location to mount your screen..
Instruction manual
FACILITY
1. Use the wall bracket as a template to drill two holes in the
wall with a depth of Ø10 mm and 50 mm. Insert three plastic
anchors into the holes.
2. Place the bracket on the wall and screw two self-screws
into the plastic anchors to fix the bracket to the wall.
3. Install the TV on the fixed base using the quick tap screws,
which you will find in the bag of supplied parts
4. Loosen the nut to adjust the angle of the TV between -15º
and +15º degrees until you get the proper position. Then
firmly secure the fixing knobs.
Note
In order to avoid accidental damage or injury, it
is recommended that this product be installed by
a professional. The supplier is exempt from any
responsibility for damages or injuries caused by a improper
installation.
ref. 50136
ES
PT
EN
FR
