Idiomas disponibles
Idiomas disponibles
CLEANING & STORAGE
WARNING: Before cleaning or storing treadmill, power off and unplug.
CLEANING
• Remove dust with a microfiber cloth.
• Remove dust, dirt, and other debris from exposed sides of the running belt to
prevent dirt from accumulating under belt.
• Scrub surface of running belt with damp cloth and soapy water and dry
thoroughly with a microfiber cloth. Do NOT get water in or near electrical
components.
STORAGE
• To fold handlebar for storage, remove safety lock and remote from handlebar.
Hold handlebar and step on handlebar release. Gently lower handlebar until
locked into place.
• Lift treadmill from back, DO NOT lift from handlebars. Use wheels on front to
roll to desired location. Store treadmill flat or upright against a stable surface,
such as a wall. Ensure it is secure before leaving unattended. Do not allow
children near upright treadmill as it may fall or cause harm.
TROUBLESHOOTING
Q: My treadmill won't turn on!
A: Ensure power cord is plugged into a grounded outlet, is properly connected to
the treadmill, and red power switch is turned on.
If having issues starting treadmill with remote, see "My remote isn't working"
below. Do not use an additional extension cord when
powering the treadmill.
Q: My treadmill turns on but it won't start! All I see are dashed lines on the
display.
A: Ensure safety clip is placed and properly seated on the handlebars
and engages the magnet.
Q: My remote isn't working!
A: Ensure battery is installed in remote and remote is pointed down at treadmill
display. If still not working, replace battery (see "Replacing Remote Battery" on
page 9 in Maintenance section).
Q: The handlebar keeps falling!
A: Ensure handlebar release lever pops up into locked position after erecting
handlebars.
Q: My treadmill is making weird sounds and is getting loud.
A: Treadmill belt may need to be lubricated or tightened (see "Lubrication" and
"Tightening Belt" on page 8 in Maintenance section). Once belt is tightened, you
may also need to re-center belt (see "Centering Belt" in Maintenance section).
11
