Idiomas disponibles
Idiomas disponibles
HARDWARE CONTENTS (shown not actual size)
AA
BB
1/4"x 13mm Bolt
M4 x 32mm Screw
Qty. 15
Qty. 16
FF
EE
Allen Wrench
Open Wrench
Qty. 1
Qty. 1
SAFETY INFORMATION
Please read and understand this entire manual before attemting to assemble or install the product.
1. Please read the Assembly Instructions prior to assembling the unit.
2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.
3. Keep all hardware and parts out of the reach of children.
4. Please wait until all steps are completed before fully tightening bolts.
5. Make sure all bolts and screws are tightly fastened before the unit is used.
6. Check that all bolts, screws are tight at least every 3 months or as needed.
CC
DD
1/4" Nut
1/4"x 10mm Bolt
Qty. 1
Qty. 1
HH
GG
Touch-up Pen
Tipping Restraint
Hardware
Qty. 1
Qty. 1 set
3
WARNING
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM WEIGHTS INDICATED. USE
WITH PRODUCTS HEAVIER THAN THE MAXIMUM WEIGHTS INDICATED MAY RESULT IN
INSTABILITY CAUSING POSSIBLE INJURY. DISTRIBUTE WEIGHT EVENLY.
SHELF MAXIMUM:
18.1kg / 40 lb
EVENLY DISTRIBUTED.
ENTIRE UNIT MAXIMUM
WEIGHT CAPACITY:
54.5 kg / 120 lb
EVENLY DISTRIBUTED
PREPARATION
Please read the instruction sheets completely before assembly. Examine all packaging material before
discarding carton. Remove any remaining staples from the carton before discarding. Remove all parts
from carton and separate into groups as indicated on part list. Please ensure all parts are included
prior to assembly. Use of power tools must be with caution and ensuring setting at low-torque , avoid
damaging the wood panels.
Estimated Assembly Time: 30 minutes.
Tools Required for Assembly: Allen wrench (provided)
4
