LD Systems XEDAI Manual De Usuario página 6

CONNECTIONS, CONTROLS AND INDICATORS
1 ETHERNET
Ethernet interface with RJ45 socket for controlling the installation amplifier
via QUESTRA application software available free of charge.
DANTE
2
TM
Dante interface with RJ45 socket for connecting the IPA amplifiers to a Dante
TM
audio network (4 IN – 4 OUT).
STATUS
3
The status LED provides information about the internal integration between
the card and the main board in the IPA power amplifier (firmware compatibility,
internal communication problems):
• White flashing during start-up. The unit is loading the data for IPA.
• Permanently white: The network stack in the card is ready – The IP settings
have been configured properly.
• Permanent red – Firmware is not compatible with motherboard, problems
with network stack.
• White flashing (slow/fast) during IP reset procedure.
4 IP RESET
Long press activates the IP reset procedure. Initially, the status LED flashes
slowly in white and when the button is pressed for 5 seconds, the status LED
flashes quickly to indicate that the IP reset procedure will be carried out after
the button is released.
6
2 1
3
4
TM