Idiomas disponibles
Idiomas disponibles
GB
Operating instructions
ITWT-800
The ITWT-800 wireless wall transmitter can be used individually for all types of intertechno
self-learning wireless receivers. For switching on and off lights, dimming and brightening lights,
operating blinds and garage doors, etc.
1 random code out of 67 million possible codes guarantees a high level of security.
Scene switching: (Fig. 1)
Multiple wireless receivers can be changed to the desired switching state with the touch of a
single button.
3 scenes can be selected.
3
Wireless receivers with storage are required for scene switching!
Removing battery strips/changing batteries (Fig. 2)
The battery fuse must be removed first.
To do this, use a screwdriver to take off the mounting plate.
The + symbol must face upwards when you insert the battery.
The CR2032 3V battery will last for approx. 20,000 operations (lifetime of around 3 years)
The LED will light up red every 4 seconds when the battery is running out.
When closing the wireless wall transmitter with the mounting plate, ensure that the arrow of the
mounting plate and the arrow on the back of the wall transmitter are both pointing upwards.
All 6 clips must properly click into place. If done correctly you should hear a distinct click.
Encoding: Teaching in wireless receivers (Fig. 3)
To adjust the encoding, please also read the operating instructions of your self-learning wireless
receiver.
Place the wireless wall transmitter near the wireless receiver.
1.) Open the transmitter as described above.
2.) Move the slider to position 1.
3.) Put the wireless receiver in learn mode.
4.) By pressing the transmitter once, the ON signal is transmitted (the LED will light up green) and
the wireless receiver takes over the encoding.
One more receiver can be taught in.
Switching ON and OFF
Now one or more wireless receivers can be switched on by pressing a button. The LED will light up
green when ON.
By pressing twice, the off signal will be transmitted and the LED will light up red 2x.
›
DIMMING AND BRIGHTENING
There are several options for use with a wireless dimmer.
