Idiomas disponibles
Idiomas disponibles
waste because it may pose a threat to the environment and human health. The
worn-out product must be handed over to the electrics and electronics recycling
center.
List of parts (fig. A)
1.
Covering
2.
Backrest adjustment key
3.
Folding key
4.
Height adjustment key
5.
Tray holder
6.
Wheels
7.
Harness
Set (fig. B)
1.
Tray
2.
Crotch guard
3.
Power cable and wire
4.
Tray guide x2
Control panel (fig. C)
1.
Rocking speed indicator (3 levels)
2.
Power LED light
3.
Time indicator
4.
Rocking ON switch / Comfort
Mode ON switch
How to install
1.
Remove plug buttons in the frontal and rear part of the frame. Connect inner
wires and then slide the upper part of the frame in (fig. 1).
2.
Position the seat vertically and then connect the upper part of the frame to
relevant holes in the seat (fig. 2).
3.
Insert tray guides in relevant holes in the seat (fig. 3).
4.
Fix the crotch guard in the lower part of the tray, then slide the tray on the
tray guides (fig. 4). The tray must be installed only when the chair frame is
unfolded (fig. 4a).
EN
8.
Tray
9.
Seat angle adjustment key
10. Footrest adjustment key
11. Power supply port
12. Rocking lock
13. Brake
5.
Seat
6.
Frontal and rear part of the
frame
7.
Left and right part of the frame
5.
Timer (15 / 30 / 45 min)
6.
Volume down / previous track
7.
ON/OFF / play key
8.
Volume up / next track
‑ 10 ‑
