Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Fully insert wood dowels (CC) into the middle holes of
stringers left & right (C & D). Tap in with a rubber mallet if
necessary. Screw 4 cam bolts (BB) all the way into the
outside holes pre-drilled on the long shelf (1). Using
dowels as a guide, attach stringers left & right (C & D) to
long shelf (A) by engaging 4 cam locks (AA).Make sure
the cam locks facing outward.
Hardware Used
AA
Cam lock
BB
Cam bolt
CC
Wood dowel
2. Carefully position the combined Hutch and Base
units at desired location. Make sure they are in line
and spaced approximately 35-3/4 inches apart for shelf
clearance.
3. Position assembled shelf (A) between the two
companion cabinets making sure the back edges are
even with each other. Ask for assistance to hold the shelf
at your desired height. Securely attach the shelf in place
by inserting the M4 x 25 mm Screws (EE) through the
countersunk holes on the stringers (C & D).
Hardware Used
EE
M4 x 25 mm Screw
1
A
BB
D
C
x 4
AA
CC
x 4
x 4
2
3
EE
A
C
x 4
5
ASSEMBLY INSTRUCTIONS
4. Attach pole holder (DD) to the stringer right (D)
using M3.5 x 13mm screws (FF). Make sure the
opening of pole holder facing up as shown figure.
Repeat last step to attach other rod holder (DD) to
stringer left (C).
Hardware Used
DD
Pole holder
FF
M3.5 x 13mm Screw
BB
5. Fit the hanging pole (B) between the pole holders (DD)
in place to hang and organize clothing. Cover the screws
head on the stringer left (C) and stringer right (D) with the
PVC covers (GG).
Hardware Used
GG
PVC Cover
D
4
DD
D
FF
x 2
x 4
5
DD
D
GG
x 4
B
6
