Idiomas disponibles
Idiomas disponibles
T R O U B L E S H O O T I N G
Fault
Inspection
My pump isn't
Check whether the hose
working.
is blocked or damaged in
any way.
The connection between the
hose / Air Pump / inflation
valve on your inflatable is
not secure.
The PSI gauge isn't working.
My board has a
With the board inflated,
puncture / leak.
apply dish-washing liquid to
a cloth and coat the valve.
With the board inflated,
apply dish-washing liquid
to a cloth and coat the deck
and sides.
Solution
Remove any blockages from the hose, or replace
if damaged.
Pause the inflation, check all connections are
secure and reinstall if necessary.
The PSI value won't usually register until it
reaches 7 PSI.
If the problem persists, please contact us.
Additional resources may be found at
www.bluefinsupboards.com/info-zone/maintenance-
repair/
If bubbling occurs, your valve will most likely need
tightening using the tool provided. Deflate your
board, reach for the nut from underneath the
board, insert the valve tightening tool and twist
clockwise until fully tightened and secure.
If bubbling occurs on the seams and deck-pad then
you can easily repair a puncture with the patches
provided and a strong adhesive glue. Apply glue
to both the affected area on the board and the
underside of the patch. Allow the glue to become
tacky before applying the patch. TIP: You can heat
the area with a hair-dryer to speed up the drying
process.
If the problem persists, please contact us.
Additional resources may be found at
www.bluefinsupboards.com/info-zone/maintenance-
repair/
UK
18
