Idiomas disponibles
Idiomas disponibles
4
MOUNTING INSTRUCTIONS
S
lt should be ensured that the mounting/siting surfaces are clean, flat and level. De
pending on the Installation circumstances, any levelling error can be compensated for
example by suitable wedges and compensating plates (permanently welded) or by the
grinding away the mounting surface. On no account must the module plates be
ground.
Notice
On no account must the module plates be ground.
S
The foundation/base frame must be sufficiently stiff so that no impermissible de
formations (e.g. deflections) occur on loading.
S
In order to keep the mounting as free of straining forces as possible, the fastening
holes on the base frame and the tank joint must be sufficiently in alignment. Same
means to the bore of the anti‐liftoff device.
S
Uniform loading on the support points should be provided where possible. Correct
adjustment of the height on the supporting points must be ensured (have compensat
ing shims ready). This is especially important for statically undefined supports.
C16M
MOUNTING INSTRUCTIONS
7
