Idiomas disponibles
Idiomas disponibles
Insert the battery into its housing until you hear the locking click, checking that it is locked
12. Early working procedures
Wear suitable gloves and clothing before using this tool. Check the tool before working
and verify the correct operation of the switch. The chain must stop when the trigger is
released. Do not use the chainsaw if the switch fails. Check that the battery voltage
matches the tool voltage.
When the trigger is released, the motor stops, but the chain may continue to rotate for a fraction
of a second. Do not touch the chain while it is moving to avoid risk of injury.
· Hold the saw firmly.
· Make sure that the chain and bar are not in contact with any object.
· Press the ON/OFF button for 3 seconds until the charging indicator lights up.
· Press the safety button with your thumb to unlock the trigger.
· Press the trigger all the way down, the machine starts.
· Do not exceed the cutting dimensions to protect the saw and battery from possible damages.
· Do not cut branches larger than those indicated in the technical specifications.
· Release the trigger if the chain is blocked, the engine stops.
36
