Jimmy H8 Flex Manual De Instrucciones página 6

Assemble the floor head with metal tube
assembly and handheld vacuum cleaner: as
shown in the picture, align the conductive needle
of the metal tube with the coupler of the suction
nozzle, push up until a "click" sound is heard.
Charging holder assembly
Assebmle accessory holders to the holer, then
fasten accessory holders with screw. Put the
vacuum cleaner in the holder, and lean the
vacuum cleaner against the wall, place the holder
in the position that vacuum cleaner floor head
does not touch gro und. Take off the handheld
vacuum cleaner, place expansion pipe on the
wall and place the holder to the expansion pipe
position, then lock in the screw. After assembly
completed, put the vacuum to charger holder to
charge or store. (Attention: Do not fix the holder
to bathroom or other humid wall.)
Assembly of accessories
For the convenience of use, this product
is specially equipped with some accessories for the hand-held part of the vacuum cleaner.
When you use the handheld vacuum cleaner alone, you can directly connect the accessories
according to your needs or connect the accessories through the stretch hose.
Name
Electric mattress brush
Upholstery tool
Crevice tool
Soft brush
Stretch hose
Connector
4
model
4-1
Accessory
holder
right
Accessory
holder left
①
4-2
Screw
Accessory
holder
③
H8 Flex
Expansion
pipe
②
④