Lenco SB-042LEDBK Manual De Usuario página 14

6 Troubleshooting
Problem
Soundbar does not respond (no power).
No sound.
The Remote Control does not work.
No sound in Bluetooth mode.
7 Technical Specification
Model Number
Lenco SB-042LED
Power Source of Remote Control
Max. speaker output
Speaker impedance
Bluetooth Specification
Frequency response
What to do
Check the mains power cable and make sure it is
plugged into a suitable power outlet.
Check that the mains power supply is switched on.
Connect the power to a different power outlet.
Check the Soundbar volume control is not at
minimum.
Check that the Soundbar is not set to MUTE.
If you are connecting to the Soundbar using a
headphones port on your external audio device
then check the volume is turned up on that device.
Replace the batteries.
Make sure there are no obstacles obscuring the
Soundbar.
Check that the Soundbar is Paired with a Bluetooth
device. If prompted enter the code '0000'.
Lenco SB-042LED
15V 2A
2 x AAA size batteries (not supplied)
40W
4Ω
V5.0
140Hz—15KHz
13