Idiomas disponibles
Idiomas disponibles
XR938H True Colour Light Reactive Welding and Grinding Helmet (ENGLISH)
WARNING
Please read and understand all instructions prior
to using the Parweld XR938H True Colour Light
Reactive Welding and Grinding Helmet.
GENERAL INFORMATION
This Parweld XR938H True Colour Light Reactive
Welding and Grinding Helmet will not protect
against severe impact hazards, such as explosive
devices or corrosive liquids. Machine guards or
eye splash protection must be used when these
hazards are present.
All Parweld XR938H light reactive welding filters
are suitable for arc welding or cutting applications.
This unit is suitable for all arc processes such
as MIG, MAG, TIG, SMAW, Plasma Arc and
Carbon Arc.
Use this helmet only for face and eye protection
against harmful rays, sparks and spatter from
welding, grinding and cutting.
The Parweld XR938H helmet is not suitable for
"overhead" welding applications, laser welding,
laser cutting, gas welding and gas cutting.
In the event of electronic failure, the welder
remains protected against UV and IR Radiation
according to Shade 16.
TECHNICAL SPECIFICATIONS
Viewing Area
Cartridge Size
UV/IR Protection
Light State
Dark State
Power Supply
Power On/Off
Switching Time
Lightening Delay
Operating Temperature
Storage Temperature
Helmet Material
Total Weight
Minimum Operating Amperage
4
The Parweld auto darkening filter should always
be used with original Parweld front and inside
cover lens.
The manufacturer is not responsible for any
modifications to the welding filter or use of the filter
in helmets of any other make.
Protection can be seriously impaired if unapproved
modifications are made.
to the local waste recovery site and place into
the appropriate recycling bin.
dispose in the correct manner. This will allow
the recycling of raw materials and help protect
the environment.
100 x 53 mm (3.94" x 2.08")
110 x 90 x 8 mm (4.33" x 3.54" x 0.31")
Permanent DIN Shade 16
DIN Shade 4
Shade DIN 5-13 variable
Built-in Solar Cells and Replaceable Battery (CR2450)
Fully Automatic
Light to Dark <1/30,000s
0.1 - 1.0s (External Variable)
-10 °C to +60 °C
-20 ºC to +70 ºC
High Impact Polyamide (Nylon)
470g
5 Amps
Please dispose of packaging
for the product in a responsible
manner. It is suitable for recycling.
Please help protect the
environment. Take the packaging
Never dispose of electrical
equipment or batteries in with
your domestic waste. If your
supplier offers disposal facility,
please use it or alternatively use
your local waste recovery site and
