Idiomas disponibles
Idiomas disponibles
USER MAINTENANCE INSTRUCTIONS
ANTI-CALC SYSTEM
A special filter inside the water tank
softens the water and prevents scale
build-up in the soleplate. The filter is
permanent and does not need replacing.
ANTI-DRIPPING SYSTEM
This iron is equipped with drip stop
function: the iron automatically stops
steaming when the temperature is too
low to prevent water from dripping out
of the soleplate.
With the anti-dripping system, you can
perfectly iron even the most delicate
fabrics.
EMPTYING THE IRON
Always empty iron after each use.
1. When finished using the iron, turn
the variable steam selector to "0"
and the temperature control dial
to "MIN".
2. Unplug the iron from the
electrical outlet.
3. Set variable steam selector to
"MAX".
4. Open water inlet cover.
5. Turn the iron upside down over the
sink with the tip pointing downward
and allow the water to flow from the
opening.
6. Set variable steam selector to "0".
7. Allow iron to cool in an upright
position before storing.
WARNING! Use caution when
emptying the iron. Burns may occur
from touching hot metal surfaces, hot
water or steam.
8
TOLL FREE: 1-800-798-7398
STORAGE
1. Always turn the variable steam
selector to "0" after you have
emptied the water tank.
2. Allow the iron to cool down.
3. Always store the iron in the upright
position to protect the soleplate.
4. From time to time, clean the exterior
of the iron with a damp cloth and
wipe dry.
5. If you use spray starch, wipe the
soleplate occasionally with a soft
damp cloth to prevent the build-up
of deposits.
6. If the iron has not been used for a
few weeks, hold the iron horizontally
and allow to steam for 2 minutes
before ironing.
IRONING CHART
NOTE: Before starting to iron
delicate fabrics, it is best to first test the
temperature of the iron on a hem or
an inside seam.
IRONING
FABRIC
LABEL
Blends
Synthetic Fibers
Acrylic
Nylon
Polyester
Silk
Wool
Cotton
Linen
Steam ironing will
harm garment.
These items can not be ironed.
To select iron temperature, align
temperature selected on dial with the
indicator on the water tank.
TEMPERATURE
STEAM
CONTROL
CONTROL
Regular ironing
may be needed and
may be performed
at any available
temperature.
•
O
••
•••
Regular dry ironing
at manufacturer
O
indicated
temperature setting
is acceptable.
www.sharkcompany.com
English
9
