Idiomas disponibles
Idiomas disponibles
How To Operate
Before using your HOT DOG STEAMER, follow the cleaning directions found in the CLEANING
& MAINTENANCE section.
1. Place the unit on a stable surface near an electrical outlet before staring.
2. Fill the Steaming Tray with cold water up to the desired level. Ensure that the water level
does not exceed the MAX ll line and does not fall below the MIN ll line on the Water
Level Indicator.
NOTE: Depending on how long you use your unit, you may need to periodically re ll the
Steaming Tray with water.
3. Place up to 24 hot dogs in the Hot Dog Tray and close the tray. Place up to 12 hot dog
buns in the Bun Warming Tray and cover with the Top Lid.
4. Turn the Control Dial to HIGH to begin steaming hot dogs. Depending on the number of
hot dogs in the tray, hot dogs may take 10-20 minutes to fully steam.
NOTE: Periodically check hot dogs and hot dogs buns to see if adequately cooked.
5. When hot dogs and buns are ready, carefully remove the Top Lid and pull open the Hot
Dog Tray using an oven mitt. Using cooking tongs, take out a bun and ll with a hot dog.
CAUTION: Use EXTREME CAUTION when opening steamer and serving! Hot steam and
hot water escaping from the unit may cause scalding.
6. Once hot dogs are full steamed, keep warm by turning the Control Dial to WARM.
Helpful Tips
• Make sure there is always a su cient amount of water left in the Steamer Tray, especially
when making numerous batches of hot dogs.
• For best results, do not over ll the Hot Dog Tray or the Bun warming Tray.
• For the buns we recommend:
Put the buns 5-7 minutes before the hotdogs are ready in the Bun warming Tray.
• If the red power indicator light does not come on after turning the dial to the ON position,
check the electrical plug to make sure it is fully plugged into outlet.
