Enlaces rápidos

ASSEMBLY INSTRUCTIONS / PLANO DE ARMADO
Before assembling the furniture,
carefully read the assembly instructions!
Antes de armar el mueble, lea con
atención el manual de ensamble!
308GFX - AMBER TV STAND
Congratulations! You have purchased a
product of excellent quality, made from
MDP or MDF wood veneer, extracted
from renewable forests. It has high
strength and current design.
Felicitaciones! Usted compró a un
producto de excelente calidad,
fabricado con placa de madera de MDP
o MDF, proveniente de florestas
renovables. Tiene alta resistencia y
diseño actual.
1) Check all parts before starting
!
assembly.
Verifique todas las partes
antes de empezar el armado.
ATENTION
ATENCIÓN
2) When starting the assembly,
don't support the parts on the
wall.
A l empezar el armado, no
apoyes las partes en la pared.
3) When placing parts and hardware aside,
be careful not to lose them.
Al poner las piezas y herrages a parte,
cuidado para no dañarlas.
4) The furniture must be mounted on the
floor, to do this, use the box itself to protect
and not damage the floor.
El mueble suele ser armando al piso, para
eso, use la propria caja para protegerlo y no
dañar al piso.
5) Begin assembly by following the
step-by-step instructions.
Comience el armado siguiendo la
instrucciones paso a paso.
6) It's the assembler's responsibility to
follow the instructions in this manual, which
are fundamental to the structure of the
furniture.
Es de responsabilidad del armador seguir
las instrucciones de este manual, que son
fundamentales para la estructura del mueble.
1) Care and cleaning should be
done with a cloth slightly
moistened with water.
La conservación y limpieza
debe ser hecha con un trapo
CARE
CUIDADOS
levemente humedecido en agua.
2) Don't use abrasive products, such as
soap, detergents and steel sponge.
No use productos abrasivos, como
saponáceo, detergentes y esponja de acero.
3) Don't use wax or oil to shine the furniture.
No use cera o aceites para darle brillo al
mueble.
4) Don't expose the furniture to weather or
excessive heat.
No exponer el mueble a interperies ni al
calor excesivo.
5) When the assembly is finished, clean the
room and the furniture.
Al terminar el armado, limpie al ambiente y
al mueble.
ASSEMBLY INSTRUCTION
PLANO DE ARMADO
Tabla de contenido
loading

Resumen de contenidos para Manhattan Comfort Amber 308GFX4

  • Página 1 ASSEMBLY INSTRUCTIONS / PLANO DE ARMADO Before assembling the furniture, 1) Care and cleaning should be 1) Check all parts before starting carefully read the assembly instructions! done with a cloth slightly assembly. Antes de armar el mueble, lea con moistened with water.
  • Página 2: Descripción

    PARTS / PIEZAS LGTH WDTH DPTH DESCRIPTION LARG ANCH GROS CANT DESCRIPCIÓN (mm) (mm) (mm) RIGHT SIDE PANEL LATERAL DERECHA LEFT SIDE PANEL LATERAL IZQUIERDA BOTTOM 1364 BASE 1364 TABLERO PARTITION DIVISORIA SHELF REPISA RIGHT DOOR PUERTA DERECHA LEFT DOOR PUERTA IZQUIERDA BACK PANEL TRASERO...
  • Página 3: Weight Supported / Peso Soportado

    HARDWARE / HERRAJES UTILIZE A RÉGUA PARA IDENTIFICAR OS PARAFUSOS USE THE RULER TO IDENTIFY THE SCREWS CODE DESCRIPTION UTILICE LA REGLA PARA IDENTIFICAR LOS TORNILLOS CANT DESCRIPCIÓN WOODEN DOWEL TARUGO (mm) MINIFIX SCREW TORNILLO MINIFIX TOOLS / HERRAMIENTAS SCREW 5X50mm TORNILLO 5X50mm PATA FINISHING COVER TARUGO...
  • Página 4 Insert the Minifix Screws. Insertar los Tornillos Minifix. Fit the Wooden Dowels. Encajar los Tarugos. Warning: Before fit the wooden dowels, make sure you are using the correct hole. For this process, consider the second hole before the edge of the plate. To be sure, the measurement between the center of the holes must be 10,07 inch according to the drawing.
  • Página 5 Glue Felts. Fit the Limiting Pin. Pegar Fieltros. Encajar los Pin Limitador Attach the tip over restraint respecting the measure. Fije la Placa de Fijación respetando la medida. Fit the Partition Panel to the Shelf. Afterwards, fit the Minifix Drums on the Shelf Panel and turn clockwise.
  • Página 6 Fit the Right Side, Partition and the Left Fit the Top Panel on the Right Side, Partition and the Side Panel to the Bottom. Afterwards, fit Left Side Panel. Afterwards, fit the Minifix Drums and the Minifix Drums and turn clockwise. turn clockwise.
  • Página 7 TIP OVER RESTRAINT INSTRUCTION Drill the wall with a 5/16" (8mm) drill where you want to fix the tip over restraint. The hole should be 25.19" (64cm) from the floor. After drilling the wall, fix the Bushing according to the instruction on the next page.
  • Página 8: Handle Assembly

    HANDLE ASSEMBLY - Fit the Plastic Screw in the central hole of the Handle; - Fold the Handle and fit the Mount the hinges on the doors. hole at the farthest end into the Montar las bisagras en las puertas Screw;...

Tabla de contenido